MFT/3 Replacement Table top Cut in 18mm Moisture Resistant MDF Multi Function Clamping Table

FREE Shipping

MFT/3 Replacement Table top Cut in 18mm Moisture Resistant MDF Multi Function Clamping Table

MFT/3 Replacement Table top Cut in 18mm Moisture Resistant MDF Multi Function Clamping Table

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods


if you take a point and draw a vertical straight line that measures 3 of whatever unit of measurement you prefer to use, and then you draw a horizontal line from that same point that measures 4, the distance between those two points to make a true right angle triangle must be equal to 5. Had I thought about this, I would be able to flip the top over when it became too abused (and I do abuse it). Keep in mind that anyone can view public collections - they may also appear in recommendations and other places. Our Universal MFT Replacement Top is made from Compact™ 88, which is a 88% Waterproof (12% maximum Absorption, Maximum) High Density Fibre Board.

In all, it probably took me 5 or 6 hours to drill the entire top, not including the time it took to prepare, paint, and poly the piece. If you don't know what that means, don't worry, it's not complicated, it's just a way of checking that an angle is at 90 degrees. We recommend workbench clamps, toggle clamps for workbenches or bench dogs, which are used as a stop for the workpiece. I'm thinking of making a laundry tower for our basement and figured that MDO was a decent starting point for that environment, all things considered (basement, laundry, sink). The edges of the MDF table top aren't very hardwearing, so to make it more durable, I'm going to be adding a hardwood trim, and I have some pieces of 18mm mahogany beading.I use whatever materials make sense for the item or project I'm working on, whether that's wood, fabric, leather, metals or plastics. com, the Sell on Etsy app, and the Etsy app, as well as the electricity that powers Etsy’s global offices and employees working remotely from home in the US.

I'd also recommend just getting the hole started on the top side without going all the way through, and then flip the top over and drill through from the bottom. I'm glad I've finally got around to doing this - it is so nice to have an actual flat benchtop back again - and will just look a bit better in future videos. If the blade fits right in to the same cut mark like it does here, that verifies that it's the true centre point. I still need to familiarise myself with everything else that an MFT table can do, because like I say I'm a total newb and there's probably lots of stuff it can do that I don't know about yet. If all you want is a hole pattern for clamping and not for accurate layout, you can use any number of inexpensive jigs or the old MFT top itself.Better Machinability, Screw Holding and Stronger Joints are only a couple of finishing features of the The Makers Workbench using the Compact™88 range.

What I’ll do is get the screws off the original MFT top in preparation to put our jig on, and fold the table legs so this can be lifted up out of the way.

As I said, I’ve had very good results with the Festool 20 mm bit in my OF 1400 using the LR-32 system. The Makers Workbench is supplied with a standard 150grit finish, leaving the striking black/grey and wood fibre core exposed.

  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns


Address: UK
All products: Visit Fruugo Shop